Front Page Forums BioMap Error When importing .img file in TissueView

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1615
    fernando tobias


    I’m using a the 4800 Imaging Tool with our 4800 TOF/TOF and while importing to TissueView, I keep getting an error (see attached) and cannot open the file.

    I’ve been routinely been using your software for months now but this is a first error that I have received of it’s kind. The only thing that is different this time is I’m imaging at a different mass range than before, now(m/z 1100 – 1750), then (m/z 700-1000)

    That data points digitized for that mass range is under the software’s limit of 32767, I’m at manual acquisition and 255 total shots/ spectrum. If you need anymore info,I’d be happy to share. [img size=458][/img]

    Markus Stoeckli

    Please remove dots from the file/directory name (except before the extension) and try again. This is an annoying bug from the past which never got fixed 😉


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.