Front Page Forums BioMap File conversion headache

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1168

    I am writing a file converter, but am stuck with the conversion of the mass scale.
    In the t2m component I have my data descibed correctly (as far as I can tell looking through the analyze info and the other posts) but how do I get the plot | spectrum to scale the mass axis in light of this info?

    I have played with all the values in the header and cannot change anything.
    Can anybody shed any light on this particular subject?

    i.e. Mass spec data is binned at 0.1amu per bin (min mass is 100, max mass is 1000). This is the contents of the t2m file. How do I set up the header (?) so that it scales the plot | spe over the correct range, with the correct bin width.
    Many thanks.

    #1170

    Forget this post.
    In the world of .net integers aren’t two bytes long any more.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.